Die Casting, Aluminum Casting, Metal Casting Technology
Home > About Us
Category and Part Number of The Die-casting Aluminium Alloy
(Die Casting Technology)
| Part Number | References | |||
|---|---|---|---|---|
| Alloy | Similar Alloy | Features | Application | |
| ADC 1 | AI-Si | AAA 413.0 | High corrosion resistance, easy to die cast, but with low durability under pressure. | Car frame, front wheel disc, inner liner for auto bread baker. |
| ADC 3 | AI-Si-Mg | AAA 360.0 | Excellent anti-impact value and anti-pressure ability, high corrosion resistance, but difficult for die casting. | Fly wheel cover, crank case and fly wheel for car, impeller blade for boats. |
| ADC 5 | AI-Mg | AA 518.0 | Excellent corrosion resistance, high anti-impact value, but difficult for die casting. | machine arm, impeller blade for boat, fishing tackle, wrench, spool, thread roller. |
| ADC 6 | AI-Mg | AA 515.0 | Excellent corrosion resistance, but not easy for die casting. | Vehicle brake handle, impeller blade for boats. Crank case, water pump, disk unit. |
| ADC 10 | AI-Si-Cu | AAB 380.0 | Excellent mechanical properties, easy for cutting and die casting | Carburetor, cylinder, cylinder lid, absorber, engine gear box, side cover, agricultural gear box, crank case lid, otor, needle machine frame, needle machine head, fishing tackle, pivot, upper lid and lower lid of gas adjuster, divider. |
| ADC 10 Z | AI-Si-Cu | AAA 380.0 | Excellent mechanical properties, but with low corrosion resistance and friable after die casting. | |
| ADC 12 | AI-Si-Cu | AA 383.0 | Excellent mechanical properties, easy for cutting and die casting. | |
| ADC 12 Z | AI-Si-Cu | AA 383.0 | Corrosion resistance, easy for die casting. | |
| ADC 14 | AI-Si-Cu | AAB 390.0 | Excellent instant abrasion resistance, easy for die casting, high durability under pressure, but with low extensibility. | Oil pump for cars, inserted parts for vehicles, parts for clutch case. |
Chemical Composition of the Die-casting Aluminium Alloy
(Aluminum Casting Technology)
| Part No. | References | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cu | Si | Mg | Zn | Fe | Mn | Ni | Sn | Ai | |
| ADC 1 | Below 1.0 | 11.0-13.0 | Below 0.3 | Below 0.5 | Below 1.3 | Below 0.3 | Below 0.5 | Below 0.1 | Alternative |
| ADC 3 | Below 0.6 | 9.0-10.0 | 0.4-0.8 | Below 0.5 | Below 1.3 | Below 0.3 | Below 0.5 | Below 0.1 | Alternative |
| ADC 5 | Below 0.2 | Below 0.3 | 4.0-8.5 | Below 0.1 | Below 1.8 | Below 0.3 | Below 0.1 | Below 0.1 | Alternative |
| ADC 6 | Below 0.1 | Below 1.0 | 2.5-4.0 | Below 0.4 | Below 0.8 | 0.4-0.6 | Below 0.1 | Below 0.1 | Alternative |
| ADC 10 | 2.0-4.0 | 7.5-9.5 | Below 0.3 | Below 1.0 | Below 1.3 | Below 0.5 | Below 0.5 | Below 0.3 | Alternative |
| ADC 10 Z | 2.0-4.0 | 7.5-9.5 | Below 0.3 | Below 0.3 | Below 1.3 | Below 0.5 | Below 0.5 | Below 0.3 | Alternative |
| ADC 12 | 1.5-3.5 | 9.6-12.0 | Below 0.3 | Below 1.0 | Below 1.3 | Below 0.5 | Below 0.5 | Below 0.3 | Alternative |
| ADC 12 Z | 1.5-3.5 | 9.6-12.0 | Below 0.3 | Below 0.3 | Below 1.3 | Below 0.5 | Below 0.5 | Below 0.3 | Alternative |
| ADC 14 | 4.0-5.0 | 16.0-18.0 | 0.45-0.65 | Below 1.5 | Below 1.3 | Below 0.5 | Below 0.3 | Below 0.3 | Alternative |
The Die Casting Ability and Other Performances of The Aluminium Alloy
 |
Solidification Temperature Range(°C ) | Die Casting Ability | ||||
|---|---|---|---|---|---|---|
| Heat–Resisting & Fragility | Air Tightness | Mold Filling Ability | ||||
| Ordinary Application | ADC 1 | 570-580 | 1 | 1 | 1 | 2 |
| ADC 10 | 540-590 | 2 | 2 | 2 | 1 | |
| ADC 12 | 520-580 | 2 | 2 | 1 | 3 | |
| Specific Application | ADC 3 | 580-600 | 1 | 1 | 1 | 3 |
| ADC 5 | 540-620 | 5 | 5 | 4 | 5 | |
| ADC 14 | 510-650 | 4 | 4 | 1 | 2 | |
Physical Properties Of Die-Casting Aluminum Alloy
(Metal Casting Technology)
| Item | Category | Ordinary Alloy | Specific Alloy | |||||
|---|---|---|---|---|---|---|---|---|
| Part No. | ADC 1 | ADC 10 | ADC 12 | ADC 3 | ADC 5 | ADC 14 | ||
| physical properties | Density | 2.55 | 2.71 | 2.7 | 2.63 | 2.57 | 2.75 | |
| Melting Point | K | 858 | 883 | 835 | 873 | 913 | 923 | |
| Specific Heat | J/gk | 0.96 | 0.96 | 0.96 | 0.96 | 0.96 | ||
| Thermal Expansion Coefficient | (180-300°C)K | 21x10 | 22x10 | 22x10 | 22x10 | 25x10 | 19.2x10 | |
| LACS% | 31 | 23 | 23 | 29 | 24 | |||
Category And Part Number Of The Die-Casting Aluminum Alloy
| Part Number | References | |
|---|---|---|
| Alloy | JIS HS302 | |
| AD 1.1 | AI-Si | ADC 1 |
| AD 1.2 | ||
| AD 3.1 | AI-Si-Mg | ADC 3 |
| AD 3.2 | ||
| AD 5.1 | AI-Mg | ADC 5 |
| AD 5.2 | ||
| AD 6.1 | AI-Mg | ADC 6 |
| AD 6.2 | ||
| AD 10.1 | AI-Si-Cu | ADC 10 |
| AD 10.2 | ||
| AD 10 Z.1 | AI-Si-Cu | ADC 10 Z |
| AD 12.1 | AI-Si-Cu | ADC 12 |
| AD 12.2 | ||
| AD 12 Z.1 | AI-Si-Cu | ADC 12 Z |
| AD 14.1 | AI-Si-Cu | ADC 14 |
| AD 14.2 | ||