Die Casting Mold Design, Aluminum Die Casting, Precision Die Casting

Radiant holding furnace:

The main body of the furnace is made of one-piece casted interior. The insulating material is low thermal conductivity, and None-Wetting refractory materials, which can lock the heat within the molten Aluminum. Furthermore, insulating boards are precisely calculated to make sure heat does not escape. This allows us to reduce the heat-loss. Therefore, it saves energy, maintains stable quality of molten aluminum and improves the temperature of working environment. Since it is not made up of crucible the furnace can operate more economically, conveniently, and safely.

GP-H800 Exterior

GP-H800 One piece interior

Our furnace offers 2 types of opening, 1 hanging type and air pressured cylinder opener. In order not to interfere with the overhead crane the air pressured type is more preferred.

Energy saving holding furnace:

The furnace is designed for reduced labor and less energy consumption. The only exhaustion of the heat energy is from the dipping pool which we emphasis to size down as much as possible. We set the SCR proportion control in the furnace according to customers¡¦ requirement. With this specially designed approach, the inclined interior increases the heat energy in the furnace to make it even more efficient but less holding capacity than the GP-H800 version.

GP-H800 9pcs heaters


GP-H series low temperature difference	GP-H800 Control panel

Furnace specialty :

1.Fuel efficient
	The holding consumption of electricity for 500kg is 3.0KW/H, when heaters are in full throttle the electricity consumption is 6.0 KW/H.
2.Pollution free
	No noises, no air pollution and improves the temperature of working environment.
3.Long service life
	Since the interior is made up of special insulating material the molten aluminum is not easy to stock on the interior, and of course there is no worry of leakage, which causes danger.
4.Stable temperature
	Both molten aluminum, heater temperature are controlled by SCR therefore, the quality of the aluminum is assured.
5.Easy maintenance
	When cleaning the furnace, changing heater, the upper part of the furnace can simply be lift up for service.

Model No.	Capacity (kg)	Dipping pool size1XW (mm)	Diagonal (mm)	Depth (mm)	Outline sizeLX W(mm)	Electricity (KW)	Suitable machine	Electricity consumptio
GP-H200	600	350 x 350	475	400	1540 x 1380	15.0	Below 200 TON	7.5kw
GP-H550	1000	350 x 350	475	450	1880 x 1495	15.0	Below 350 TON	7.5kw
GP-H800	1200	450 x 450	660	450	2035 x 1495	21.0	Below 800 TON	7.5kw

Dipping Pool

The dimension of the dipping pool must be confirmed prior to manufacture?Correct size will minimized the lost of energy and prolongs the life cycle of the furnace
*Furnace is able to adjust up and down for 10 cm; dipping pool height is 115 cm (GP-H500, GP-H800), 110cm (GP-H200)?

Other Specs

Holding temperature: 720¢XC refilling temp, molten aluminum 660¢XC
Steel casing: 6m/m,4.5m/m,10m/m steel board, 2 inch L-type steel, 4 inch steel frame for supporting structure, iron casted refilling runner
Furnace interior provided by Foseco of England, None-Wetting refractory materials.
Heaters: Sweden Kanthal AF heater.
Furnace upper section opening type: Lift up.
Control box: Hanging or laying.
Main control and over heating protection control: Main control is the SCR; o over heating protection control will be automatic controlled by the heating components. We also manufacture pouring bowl for aluminum deliver during production. Pouring bowl interior is also provided by FOSECO.